GEOMETRIC DIMENSIONING & TOLERANCING
GDT1 Series Video Curriculum Outline
Introduction:
The Geometric Dimensioning & Tolerancing Video Curriculum represents a series video presentation covering basic GD&T principles and applications at an introductory level. Basic concepts involving GD&T, how it is applied and used are explored topic areas. All videos are in an MP-4 format and can be used in live and virtual environments. Also includes a Downloadable Self-Check Summative Evaluation PDF.
Any videos used in the educational process are not meant to replace textbooks nor the role of instructors/teachers delivering training on electrical technology. Suggested learning environments utilizing these learning videos could include:
Typical Classroom Delivery
On-Line Classroom Delivery
Apprenticeship Learning Environments
Self-Taught Electrical Technology Environments
|
TOPIC ID |
GD&T TOPIC COVERED |
MINUTES |
LEARNING OUTCOMES |
|
GDT1A000 |
Introduction to GD&T |
6.25 |
1. Describe the purpose of GD&T 2. State 4 reasons to use GD&T |
|
GDT1A010 |
Tolerance |
11.1 |
1. Define Tolerance and how this relates to part design 2. Identify the typical methods involved in Conventional Tolerancing 3. Describe what a part’s Maximum and Least Material Condition is 4. Determine measured part’s acceptance condition. |
|
GDT1A020 |
Types of Fit |
6.25 |
1. Identify and Describe 2 types of fit 2. State the difference between Allowance and Clearance |
|
GDT1A030 |
Features of GD&T |
4.5 |
1. Define & describe Features related to GD&T 2. Identify 5 types of GD&T Features |
|
GDT1A040 |
Datums |
7.0 |
1. Define the term Datum 2. Identify Datum Features on Prints 3. Name and Reference Control Frames on prints. |
|
GDT1A050 |
Datum Control Frames |
7.1 |
1. Identify GD&T Control Frames 2. Differentiate the information contained in the GD&T Control Frames. |
|
GDT1A060 |
GD&T Form |
6.5 |
1. Describe GD&T Forms and Characteristics 2. Identify 4 GD&T Form Symbols 3. Identify Tolerances related to GD&T Forms |
|
GDT1A070 |
GD&T Profile & Orientation |
5.1 |
1. Identify 2 types of Profile Symbols 2. Differentiate among Orientation 1. Differentiate among Orientation Symbols |
|
GDT1A080 |
GD&T Location & Runout |
8.5 |
1. Differentiate among Position, Concentricity & Symmetry 2. Describe the difference between Runout & Total Runout |